Daily maintenance of cast iron platform

Cast iron platforms, as a kind of important industrial infrastructure equipment, are widely used in a variety of meticulous measurement, processing and assembly industries because of their suitable accuracy, high stability and high practicality. However, the service life and accuracy of cast iron platforms depend largely on the level of their care and maintenance. Below we will introduce how to care and maintain from the following aspects.

1: Check whether the support point of the platform and the adjusting pad iron are firm, confirm the platform is smooth, and the cast iron platform will be adjusted to the qualified accuracy by the specialized technicians.

2: The cast iron platform should be used to hold and put the workpiece gently, do not move the rough workpiece on the cast iron platform, so as not to cause damage to the cast iron platform work surface bumping, scratches and so on.

3: In order to prevent the overall deformation of the cast iron platform, after use, the workpiece should be taken down from the cast iron platform, to avoid the workpiece for a long time on the cast iron platform pressure caused by the deformation of the cast iron platform.

4: In order to prevent the deformation of the cast iron platform, in the lifting of the cast iron platform, four steel wire rope of the same length should be used to hang the four lifting holes on the cast iron platform, the cast iron platform will be lifted smoothly on the transportation tool.

5: cast iron platform when not in use to wash the work surface in time, and then coated with a layer of anti-rust oil, and covered with rustproof paper, cast iron platform with the cast iron platform of the outer packaging will be cast iron platform cover, in order to prevent the usual inattention caused by the damage to the work surface of the cast iron platform.

6: The cast iron platform should be installed in a ventilated, dry environment, and away from heat sources, corrosive gases, corrosive liquids.

7: cast iron platform to implement the cycle of verification, verification cycle should be determined according to the use of specific circumstances, the general situation for a year or half a year.

In short, by actively taking maintenance measures, can be found in a timely manner and attentive service potential problems, to confirm the long-term stability and accuracy of the cast iron platform, so as to improve production efficiency and product quality.